1000 - The strain energy stored in a specimen when stained within the elastic limit is known as __________
1000 - The strain energy stored in a specimen when stained within the elastic limit is known as __________
Resilience
1001 - The strength of beams depend merely on________
1001 - The strength of beams depend merely on________
Modulus section
1002 - The strength of the column with helical reinforcement shall be ____ times the strength of similar column with lateral ties.
1002 - The strength of the column with helical reinforcement shall be ____ times the strength of similar column with lateral ties.
1.05
1003 - The stress acts tangential to circumference is called ______ stress.
1003 - The stress acts tangential to circumference is called ______ stress.
Hoop
1004 - The stress at which extension of a material takes place more quickly as compared to the increase in load is called ____________
1004 - The stress at which extension of a material takes place more quickly as compared to the increase in load is called ____________
Yielding point
1005 - The stress at which extension of a material takes place more quickly as compared to the increase in load, is called
1005 - The stress at which extension of a material takes place more quickly as compared to the increase in load, is called
yielding point.
1006 - The stress corresponding to 0.2% of strain in the stress-strain curve is _________
1006 - The stress corresponding to 0.2% of strain in the stress-strain curve is _________
Proof stress
1007 - The stress corresponding to breaking point is known as _____________
1007 - The stress corresponding to breaking point is known as _____________
breaking stress
1008 - The stress in a rod is 70 N/mm^2 and the modulus of elasticity is 2 x 10^5 N/mm^2. what will be the strain in the rod?
1008 - The stress in a rod is 70 N/mm^2 and the modulus of elasticity is 2 x 10^5 N/mm^2. what will be the strain in the rod?
0.0003
1009 - The stress in the wall of a cylinder in a direction normal to its longitudinal axis, due to a force acting along the circumference, is known as
1009 - The stress in the wall of a cylinder in a direction normal to its longitudinal axis, due to a force acting along the circumference, is known as
hoop stress
1010 - The stress induced in a body, when subjected to two equal and opposite forces which are acting tangentially across the resisting section resulting the shearing of the body across its section is called ____________
1010 - The stress induced in a body, when subjected to two equal and opposite forces which are acting tangentially across the resisting section resulting the shearing of the body across its section is called ____________
Shear stress
1011 - The stress is directly proportional to _______
1011 - The stress is directly proportional to _______
y
1012 - The stress necessary to initiate yielding, is considerably
1012 - The stress necessary to initiate yielding, is considerably
more than that necessary to continue it
1013 - The stress which acts in a direction perpendicular to the area is called ____________
1013 - The stress which acts in a direction perpendicular to the area is called ____________
Normal stress
1014 - The stress which is just sufficient to cause a permanent set is known as ___________
1014 - The stress which is just sufficient to cause a permanent set is known as ___________
proof stress
1015 - The structures constructed along are distributaries are called as _______
1015 - The structures constructed along are distributaries are called as _______
Outlets
1016 - The study of ecosystems is known as _________
1016 - The study of ecosystems is known as _________
Ecology
1017 - The tangential force per unit area is _________
1017 - The tangential force per unit area is _________
Shear stress
1018 - The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 x 10^6 kg/cm^2)
1018 - The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 x 10^6 kg/cm^2)
102 kg
1019 - The tensile test is carried on ________ material.
1019 - The tensile test is carried on ________ material.
Ductile
1020 - The tension coefficient of any member is
1020 - The tension coefficient of any member is
tension divided by the length
1021 - The term "Tenacity" means __________
1021 - The term "Tenacity" means __________
Ultimate stress
1022 - The thermal stress is a function of _____________ P. Coefficient of linear expansion Q. Modulus of elasticity R. Temperature rise
1022 - The thermal stress is a function of _____________ P. Coefficient of linear expansion Q. Modulus of elasticity R. Temperature rise
Only R
1023 - The time for which water is written in a settling tank is known as ________
1023 - The time for which water is written in a settling tank is known as ________
Detention time
1024 - The time required for overtaking ___________ seconds.
1024 - The time required for overtaking ___________ seconds.
9 to 14
1025 - The top chord members of roof truss is called ___________
1025 - The top chord members of roof truss is called ___________
Principal rafters
1026 - The top line of roof truss is called as ___________
1026 - The top line of roof truss is called as ___________
Ridge line
1027 - The transverse shear stress acting in a beam of rectangular cross-section, subjected to a transverse shear load, is ____________
1027 - The transverse shear stress acting in a beam of rectangular cross-section, subjected to a transverse shear load, is ____________
Variable with maximum on the neutral axis
1028 - The turbidity in water is expressed in terms of ________
1028 - The turbidity in water is expressed in terms of ________
Silica scale
1029 - The type of butt joints in common use, is :
1029 - The type of butt joints in common use, is :
single inverted V-butt joint
1030 - The type of joint provided to release thermal stresses is called _______
1030 - The type of joint provided to release thermal stresses is called _______
Expansion joint
1031 - The ultimate bearing capacity/factor of safety = ____________
1031 - The ultimate bearing capacity/factor of safety = ____________
Safe bearing capacity
1032 - The ultimate shear force at a section of an RCC beam is 300 kN. The shear resisted by concrete is 77.5 kN. What is the shear for which shear reinforcement is required?
1032 - The ultimate shear force at a section of an RCC beam is 300 kN. The shear resisted by concrete is 77.5 kN. What is the shear for which shear reinforcement is required?
222.5 kN
1033 - The ultimate strength in flexure is known as modulus of ________
1033 - The ultimate strength in flexure is known as modulus of ________
Rupture
1034 - The under mentioned type is simple strain
1034 - The under mentioned type is simple strain
All the above.
1035 - The unit of force in S.I. units is ?
1035 - The unit of force in S.I. units is ?
Newton
1036 - The unit of force in S.I. units is_________________?
1036 - The unit of force in S.I. units is_________________?
newton
1037 - The unit of power in S.I. units is______________?
1037 - The unit of power in S.I. units is______________?
watt
1038 - The unit of work or energy in S.I. units is________________?
1038 - The unit of work or energy in S.I. units is________________?
joule
1039 - The units of discharge are _____________
1039 - The units of discharge are _____________
m^3/s
1040 - The units of moment of inertia of mass are_____________________?
1040 - The units of moment of inertia of mass are_____________________?
kg m2
1041 - The upstream slope recommended for sand and gravel with RCC core wall is __________
1041 - The upstream slope recommended for sand and gravel with RCC core wall is __________
2.5:1
1042 - The upward deflection caused by the prop is _____________
1042 - The upward deflection caused by the prop is _____________
Pl^3/3EI
1043 - The value of _________ is relatively high for short columns.
1043 - The value of _________ is relatively high for short columns.
Buckling load
1044 - The value of design Bond stress in plain bars will increase in compression by __________
1044 - The value of design Bond stress in plain bars will increase in compression by __________
0.25
1045 - The value of Poisson's ratio always remains
1045 - The value of Poisson's ratio always remains
less than one
1046 - The variation of shear stress is ____________
1046 - The variation of shear stress is ____________
Parabolic
1047 - The Velocity at which flow changes from viscous to turbulent is called __________ velocity.
1047 - The Velocity at which flow changes from viscous to turbulent is called __________ velocity.
Critical
1048 - The water bearing strata is known as _________
1048 - The water bearing strata is known as _________
An aquifer
1049 - The water is considered soft when the ppm is between _______
1049 - The water is considered soft when the ppm is between _______
0 – 50
1050 - The water of the river has an important property known as __________
1050 - The water of the river has an important property known as __________
Self purification
1051 - The weakest section of a diamond riveting, is the section which passes through
1051 - The weakest section of a diamond riveting, is the section which passes through
first row
1052 - The weight of a body is due to____________________?
1052 - The weight of a body is due to____________________?
gravitational force of attraction towards the centre of the earth
1053 - The Wheels of Rolling stock have slope ________
1053 - The Wheels of Rolling stock have slope ________
1 in 20
1054 - The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are :
1054 - The width b and depth d of a beam cut from a wooden cylindrical log of 100 cm diameter for maximum strength are :
b = 57.73 cm d = 81.65 cm
1055 - The width of broad gauge is ___________
1055 - The width of broad gauge is ___________
1.676m
1056 - The wing wall resembling the letter "U" in plan, is ___________
1056 - The wing wall resembling the letter "U" in plan, is ___________
Return wing wall
1057 - The Youngs modulus of elasticity of a material is 2.5 times its modulus of rigidity. Then what will be its Poissons ratio?
1057 - The Youngs modulus of elasticity of a material is 2.5 times its modulus of rigidity. Then what will be its Poissons ratio?
0.25
1058 - Theorotical velocity = _______
1058 - Theorotical velocity = _______
(2gh)^1/2
1059 - Three sections in a beam are of equal length of 100mm. All three sections are pulled axially with 50kN and due to it elongated by 0.2mm. What will be the resultant strain in the beam?
1059 - Three sections in a beam are of equal length of 100mm. All three sections are pulled axially with 50kN and due to it elongated by 0.2mm. What will be the resultant strain in the beam?
0.006
1060 - Ties are load carrying members of a frame, which are subjected to
1060 - Ties are load carrying members of a frame, which are subjected to
axial tension loads
1061 - To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is
1061 - To ascertain the maximum permissible eccentricity of loads on circular columns, the rule generally followed, is
middle fourth rule of columns
1062 - To avoid _____ stresses in beams, one end of the beam is placed on the rollers.
1062 - To avoid _____ stresses in beams, one end of the beam is placed on the rollers.
Temperature
1063 - To avoid the failure of a column by buckling ___________ limits are to be recommended.
1063 - To avoid the failure of a column by buckling ___________ limits are to be recommended.
Slenderness
1064 - To avoid the failure of a column by buckling ___________ limits are to be recommended.
1064 - To avoid the failure of a column by buckling ___________ limits are to be recommended.
Slenderness
1065 - To determine hoop stress, efficiency of _________ is to be considered.
1065 - To determine hoop stress, efficiency of _________ is to be considered.
Longitudinal joint
1066 - To ensure economy in dam sections, the ______ should be minimum.
1066 - To ensure economy in dam sections, the ______ should be minimum.
Base width
1067 - To improve the anchorage of bars ______ are provided in plain bars.
1067 - To improve the anchorage of bars ______ are provided in plain bars.
Standard hooks
1068 - To what radius a silver strip 200 mm wide and 40 mm thick can be bent if the maximum stress in the ship is 80 N/mm^2. Young’s modulus for Silver is 80×103 N/mm^2.
1068 - To what radius a silver strip 200 mm wide and 40 mm thick can be bent if the maximum stress in the ship is 80 N/mm^2. Young’s modulus for Silver is 80×103 N/mm^2.
20m
1069 - To what radius an Aluminium strip 300 mm wide and 40mm thick can be bent, if the maximum stress in a strip is not to exceed 40 N/mm^2. Take young’s modulus for Aluminium is 7×105 N/mm^2.
1069 - To what radius an Aluminium strip 300 mm wide and 40mm thick can be bent, if the maximum stress in a strip is not to exceed 40 N/mm^2. Take young’s modulus for Aluminium is 7×105 N/mm^2.
35m
1070 - Torsion reinforcement is provided in ___________ slab
1070 - Torsion reinforcement is provided in ___________ slab
Two way slab
1071 - Torsional modulus is ___________ to torsional strength.
1071 - Torsional modulus is ___________ to torsional strength.
Directly proportional
1072 - Torsteel is an example of _______
1072 - Torsteel is an example of _______
Ductility
1073 - Transverse bars are also called as _________
1073 - Transverse bars are also called as _________
Distribution bars
1074 - Trusses are adopted for ___________ span.
1074 - Trusses are adopted for ___________ span.
Very large
1075 - Trusses are subjected to ___________ stress.
1075 - Trusses are subjected to ___________ stress.
Direct
1076 - Two non-collinear parallel equal forces acting in opposite direction________________?
1076 - Two non-collinear parallel equal forces acting in opposite direction________________?
constitute a couple
1077 - Two sections in a bar of length 10cm and 20cm respectively are pulled axially. It causes an elongation of 0.2mm and 0.4mm respectively in each section. What will be the resultant strain in the bar?
1077 - Two sections in a bar of length 10cm and 20cm respectively are pulled axially. It causes an elongation of 0.2mm and 0.4mm respectively in each section. What will be the resultant strain in the bar?
sd0.004
1078 - U.D.L stands for?
1078 - U.D.L stands for?
Uniformly distributed loads
1079 - Units of deflection are _________
1079 - Units of deflection are _________
m
1080 - Unsymmetrical bending occurs due to ______
1080 - Unsymmetrical bending occurs due to ______
The bending moment diagram is unsymmetrical
1081 - Upper floor is also known as ________
1081 - Upper floor is also known as ________
Suspended floor
1082 - Using Mohr’s theorem, calculate the maximum slope of a cantilever beam if the bending moment area diagram is 90kNm^2. Take EI = 4000 kNm^2.
1082 - Using Mohr’s theorem, calculate the maximum slope of a cantilever beam if the bending moment area diagram is 90kNm^2. Take EI = 4000 kNm^2.
0.0225 radians
1083 - Varignon’s theorem is called as _________
1083 - Varignon’s theorem is called as _________
Principle of moments
1084 - Vertical stirrups are a form of _______ reinforcement.
1084 - Vertical stirrups are a form of _______ reinforcement.
Shear
1085 - Volumetric strain = 3× _____ strain.
1085 - Volumetric strain = 3× _____ strain.
Linear
1086 - Volumetric strain = 3× _____________
1086 - Volumetric strain = 3× _____________
Linear strain
1087 - Warabandi has been practiced in India for more than ____________ years.
1087 - Warabandi has been practiced in India for more than ____________ years.
125 years
1088 - Water stored in dam is expressed in _______
1088 - Water stored in dam is expressed in _______
Million cubic metres
1089 - Water table should be at least __________ m below subgrade.
1089 - Water table should be at least __________ m below subgrade.
1.2 m
1090 - Water works are generally design with design period of __________
1090 - Water works are generally design with design period of __________
30 years
1091 - Water-cement ratio varies normally from ______________ to __________
1091 - Water-cement ratio varies normally from ______________ to __________
0.42 – 0.48
1092 - What are the units for section modulus?
1092 - What are the units for section modulus?
m^3
1093 - What are the units of axial stiffness?
1093 - What are the units of axial stiffness?
N/ m
1094 - What are the units of flexural rigidity?
1094 - What are the units of flexural rigidity?
Nm^2
1095 - What are the units of measurement for wooden and steel trusses?
1095 - What are the units of measurement for wooden and steel trusses?
1 N.o
1096 - What are the units of true strain?
1096 - What are the units of true strain?
No dimensions
1097 - What is a creep?
1097 - What is a creep?
Gradual increase of plastic strain with time at constant load
1098 - What is a design period for storage dam?
1098 - What is a design period for storage dam?
50 years
1099 - What is a detention time for mechanically cleaned tanks?
1099 - What is a detention time for mechanically cleaned tanks?
1.5 to 3 hours
1100 - What is Hooke’s law for the 1-D system?
1100 - What is Hooke’s law for the 1-D system?
The relation between normal stress and the corresponding strain
1101 - What is mass moment of inertia of circular plate?
1101 - What is mass moment of inertia of circular plate?
Mr^2/4
1102 - What is MOI?
1102 - What is MOI?
ar^2
1103 - What is strain energy?
1103 - What is strain energy?
The work done by the applied load In stretching the body
1104 - What is tensile strain?
1104 - What is tensile strain?
The ratio of change in length to the original length
1105 - What is the allowable stress in cast iron?
1105 - What is the allowable stress in cast iron?
5500 N/mm^2
1106 - What is the anchorage value of standard "U" type hook?
1106 - What is the anchorage value of standard "U" type hook?
16 times the diameter of bar
1107 - What is the approximate value of coefficient of linear expansion for steel?
1107 - What is the approximate value of coefficient of linear expansion for steel?
11.5 × 10^-6 /°C
1108 - What is the bending moment at end supports of a simply supported beam?
1108 - What is the bending moment at end supports of a simply supported beam?
Zero
1109 - What is the bulk modulus of elasticity?
1109 - What is the bulk modulus of elasticity?
The ratio of direct stress to volumetric strain
1110 - What is the coefficient of rugosity for brick lined surface?
1110 - What is the coefficient of rugosity for brick lined surface?
0.015
1111 - What is the design Bond stress in plane bars intention for m^25 grade concrete?
1111 - What is the design Bond stress in plane bars intention for m^25 grade concrete?
1.4 N/mm^2
1112 - What is the desirable limit for sulphates in drinking water?
1112 - What is the desirable limit for sulphates in drinking water?
150 mg/L
1113 - What is the desirable limit of calcium in drinking water?
1113 - What is the desirable limit of calcium in drinking water?
75 mg/l
1114 - What is the effective length of a column at both ends fixed?
1114 - What is the effective length of a column at both ends fixed?
l/2
1115 - What is the elongation percentage of a steel rod of 50 mm diameter if the total extension is is 54 mm and gauge length is 200 mm.
1115 - What is the elongation percentage of a steel rod of 50 mm diameter if the total extension is is 54 mm and gauge length is 200 mm.
0.27
1116 - What is the expression for modulus of rigidity in terms of modulus of elasticity and the Poissons ratio?
1116 - What is the expression for modulus of rigidity in terms of modulus of elasticity and the Poissons ratio?
G = E / 2(1 + μ)
1117 - What is the expression of the bending equation?
1117 - What is the expression of the bending equation?
M/I = σ/y = E/R
1118 - What is the factor of safety?
1118 - What is the factor of safety?
The ratio of ultimate stress to the permissible stress
1119 - What is the factor of safety?
1119 - What is the factor of safety?
The ratio of ultimate stress to the permissible stress
1120 - What is the flow of velocity in the pressure conduit?
1120 - What is the flow of velocity in the pressure conduit?
0.6 to 0.8 m/s
1121 - What is the formula for shear stress?
1121 - What is the formula for shear stress?
Shear resistance/shear area
1122 - What is the formula of radius of gyration?
1122 - What is the formula of radius of gyration?
k^2 = I/A
1123 - What is the formula of theorem of parallel axis?
1123 - What is the formula of theorem of parallel axis?
IAB = Ah^2 + IG
1124 - What is the formula of theorem of perpendicular axis?
1124 - What is the formula of theorem of perpendicular axis?
Izz – Ixx = Iyy
1125 - What is the horsepower of the engine if the power is 219324 W.
1125 - What is the horsepower of the engine if the power is 219324 W.
294
1126 - What is the hydraulic depth (D) of a rectangular section?
1126 - What is the hydraulic depth (D) of a rectangular section?
y
1127 - What is the limiting values of Poisson’s ratio?
1127 - What is the limiting values of Poisson’s ratio?
0 and 0.5
1128 - What is the mass MOI of a hollow circular cylinder if R is the outer diameter and r is the inner diameter?
1128 - What is the mass MOI of a hollow circular cylinder if R is the outer diameter and r is the inner diameter?
M(R + r)/4
1129 - What is the mass MOI of a rectangular plate about x-axis passing through the C.G of the plate if the y-axis is parallel to d and perpendicular to b?
1129 - What is the mass MOI of a rectangular plate about x-axis passing through the C.G of the plate if the y-axis is parallel to d and perpendicular to b?
Md^2/12
1130 - What is the mass MOI of a rectangular plate about y-axis passing through the C.G of the plate if the y-axis is parallel to d and perpendicular to b?
1130 - What is the mass MOI of a rectangular plate about y-axis passing through the C.G of the plate if the y-axis is parallel to d and perpendicular to b?
Mb^2/12
1131 - What is the mass MOI of right circular cone of radius R and height H about its axis?
1131 - What is the mass MOI of right circular cone of radius R and height H about its axis?
3MR^2/10
1132 - What is the maximum bending moment for simply supported beam carrying a point load "W" kN at its centre?
1132 - What is the maximum bending moment for simply supported beam carrying a point load "W" kN at its centre?
W×l/4 kNm
1133 - What is the maximum shear force, when a cantilever beam is loaded with udl throughout?
1133 - What is the maximum shear force, when a cantilever beam is loaded with udl throughout?
w×l
1134 - What is the maximum shear stress for M20 grade concrete?
1134 - What is the maximum shear stress for M20 grade concrete?
2.8 N/mm^2
1135 - What is the minimum number of longitudinal bars provided in the rectangular column?
1135 - What is the minimum number of longitudinal bars provided in the rectangular column?
4
1136 - What is the minimum percentage of reinforcement provided in mild steel?
1136 - What is the minimum percentage of reinforcement provided in mild steel?
0.15 % of gross area
1137 - What is the minimum shoulder width provided for village roads?
1137 - What is the minimum shoulder width provided for village roads?
0.5 m
1138 - What is the minimum value of eccentricity provided in columns?
1138 - What is the minimum value of eccentricity provided in columns?
30 mm
1139 - What is the mix proportion for M15 grade concrete?
1139 - What is the mix proportion for M15 grade concrete?
0.043101851852
1140 - What is the modulus of resilience?
1140 - What is the modulus of resilience?
The ratio of proof resilience to volume
1141 - What is the moment due to dead load in case of continuous beams at the middle of interior spans?
1141 - What is the moment due to dead load in case of continuous beams at the middle of interior spans?
w L^2 / 24
1142 - What is the moment of inertia of a circular section?
1142 - What is the moment of inertia of a circular section?
Ï€D^4/64
1143 - What is the moment of inertia of a rectangular section about an horizontal axis passing through base?
1143 - What is the moment of inertia of a rectangular section about an horizontal axis passing through base?
bd^3/3
1144 - What is the moment of inertia of a rectangular section about an horizontal axis through C.G?
1144 - What is the moment of inertia of a rectangular section about an horizontal axis through C.G?
bd^3/12
1145 - What is the moment of inertia of a triangular section about an axis passing through C.G. and parallel to the base?
1145 - What is the moment of inertia of a triangular section about an axis passing through C.G. and parallel to the base?
bh^3/36
1146 - What is the moment of inertia of a triangular section about the base?
1146 - What is the moment of inertia of a triangular section about the base?
bh^3/12
1147 - What is the other name for a positive bending moment?
1147 - What is the other name for a positive bending moment?
Sagging
1148 - What is the painting coefficient for flush doors?
1148 - What is the painting coefficient for flush doors?
2.4
1149 - What is the point of contraflexure in a fixed beam of span 5m?
1149 - What is the point of contraflexure in a fixed beam of span 5m?
3.75 m
1150 - What is the porosity percentage in gravel?
1150 - What is the porosity percentage in gravel?
30 – 40 %
1151 - What is the process in which the metal is cooled rapidly in water after heating the metal above the lower critical temperature to increase the hardness of the material?
1151 - What is the process in which the metal is cooled rapidly in water after heating the metal above the lower critical temperature to increase the hardness of the material?
Quenching
1152 - What is the process of heating the metal in the furnance to a temperature slightly above the upper critical temperature and cooling slowly In the furnance.
1152 - What is the process of heating the metal in the furnance to a temperature slightly above the upper critical temperature and cooling slowly In the furnance.
Annealing
1153 - What is the product of force and radius?
1153 - What is the product of force and radius?
Turning moment
1154 - What is the product of the mass and the square of the distance of the center of gravity of the mass from an axis?
1154 - What is the product of the mass and the square of the distance of the center of gravity of the mass from an axis?
Mass moment of inertia
1155 - What is the rankines constant for cast iron?
1155 - What is the rankines constant for cast iron?
1/ 1600
1156 - What is the ratio of maximum deflection to maximum bending stress if a simply supported rectangular beam of span "L" and it carries a central load W.
1156 - What is the ratio of maximum deflection to maximum bending stress if a simply supported rectangular beam of span "L" and it carries a central load W.
L^2/ 6 Ed
1157 - What is the ratio of Youngs modulus E to shear modulus G in terms of Poissons ratio?
1157 - What is the ratio of Youngs modulus E to shear modulus G in terms of Poissons ratio?
2(1 + μ)
1158 - What is the recommended value of effective length if the column is effectively held in position and fixed against rotation in both ends?
1158 - What is the recommended value of effective length if the column is effectively held in position and fixed against rotation in both ends?
0.65 l
1159 - What is the relation between maximum stress induced due to gradual load to maximum stress the sudden load?
1159 - What is the relation between maximum stress induced due to gradual load to maximum stress the sudden load?
Maximum stress in gradual load is half to the maximum stress in sudden load
1160 - What is the relation between maximum stress induced due to sudden loading to maximum stress the gradual loading?
1160 - What is the relation between maximum stress induced due to sudden loading to maximum stress the gradual loading?
Maximum stress in sudden load is twice to the maximum stress in gradual load
1161 - What is the relationship between modulus of elasticity and modulus of rigidity?
1161 - What is the relationship between modulus of elasticity and modulus of rigidity?
C = 2E / (1 + μ)
1162 - What is the relationship between the linear elastic properties Youngs modulus, bulk modulus and rigidity modulus?
1162 - What is the relationship between the linear elastic properties Youngs modulus, bulk modulus and rigidity modulus?
9/E = 1/K + 3/G
1163 - What is the relationship between Youngs modulus E, modulus of rigidity C, and bulk modulus K?
1163 - What is the relationship between Youngs modulus E, modulus of rigidity C, and bulk modulus K?
E = 9KC / (3K + C)
1164 - What is the section modulus (Z) for a rectangular section?
1164 - What is the section modulus (Z) for a rectangular section?
bd^2/6
1165 - What is the splay provided in splayed wing walls?
1165 - What is the splay provided in splayed wing walls?
45°
1166 - What is the strain energy stored in a body due to gradually applied load?
1166 - What is the strain energy stored in a body due to gradually applied load?
σV^2/2E
1167 - What is the strain energy stored in a body when the load is applied gradually?
1167 - What is the strain energy stored in a body when the load is applied gradually?
σV^2/2E
1168 - What is the strain energy stored in a body when the load is applied suddenly?
1168 - What is the strain energy stored in a body when the load is applied suddenly?
σV^2/2E
1169 - What is the strain energy stored in a body when the load is applied with impact?
1169 - What is the strain energy stored in a body when the load is applied with impact?
σV^2/2E
1170 - What is the stress in compression, if d’/d value is 0.1 for Fe415 steel?
1170 - What is the stress in compression, if d’/d value is 0.1 for Fe415 steel?
353 N/mm^2
1171 - What is the stress-strain curve?
1171 - What is the stress-strain curve?
It is the relationship between stress and strain
1172 - What is the unit of mass moment of inertia?
1172 - What is the unit of mass moment of inertia?
m^6
1173 - What is the unit of product of inertia?
1173 - What is the unit of product of inertia?
mm^4
1174 - What is the unit of radius of gyration?
1174 - What is the unit of radius of gyration?
m
1175 - What is the value of stress induced in the rod due to impact load?
1175 - What is the value of stress induced in the rod due to impact load?
P/A (1 + (1 + 2AEh/PL)^1/2)
1176 - What is the variation in the BM, if the simply supported beam carries a point load at the centre.
1176 - What is the variation in the BM, if the simply supported beam carries a point load at the centre.
Triangular
1177 - What is variation in SFD, if the type of loading in the simply supported beam is U.D.L is ____
1177 - What is variation in SFD, if the type of loading in the simply supported beam is U.D.L is ____
Linear
1178 - What kind of elastic materials are derived from a strain energy density function?
1178 - What kind of elastic materials are derived from a strain energy density function?
Hyper elastic materials
1179 - What the number that measures an object’s resistance to being deformed elastically when stress is applied to it?
1179 - What the number that measures an object’s resistance to being deformed elastically when stress is applied to it?
Elastic modulus
1180 - What will be the amount of axial pull be applied on a a 4cm diameter bar to get an instantaneous stress value of 143 N/mm^2?
1180 - What will be the amount of axial pull be applied on a a 4cm diameter bar to get an instantaneous stress value of 143 N/mm^2?
60kN
1181 - What will be the approximate value of shear modulus of a material if the modulus of elasticity is 189.8 GN/m^2 and its Poissons ratio is 0.30?
1181 - What will be the approximate value of shear modulus of a material if the modulus of elasticity is 189.8 GN/m^2 and its Poissons ratio is 0.30?
73 GN/m^2
1182 - What will be the elastic modulus of a material if the Poisson’s ratio for that material is 0.5?
1182 - What will be the elastic modulus of a material if the Poisson’s ratio for that material is 0.5?
Three times its shear modulus
1183 - What will be the elongation of a bar of 1250mm^2 area and 90cm length when applied a force of 130kN if E = 1.05x 105 N/mm^2?
1183 - What will be the elongation of a bar of 1250mm^2 area and 90cm length when applied a force of 130kN if E = 1.05x 105 N/mm^2?
0.891mm
1184 - What will be the instantaneous stress produced in a bar 10cm^2 in area ans 4m long by the sudden application of tensile load of unknown magnitude, if the extension of the bar due to suddenly applied load is 1.35mm if E = 2×105 N/mm^2?
1184 - What will be the instantaneous stress produced in a bar 10cm^2 in area ans 4m long by the sudden application of tensile load of unknown magnitude, if the extension of the bar due to suddenly applied load is 1.35mm if E = 2×105 N/mm^2?
67.5 N/mm^2
1185 - What will be the minimum diameter of a steel wire, which is used to raise a load of 4000N if the stress in the rod is not to exceed 95 MN/m^2?
1185 - What will be the minimum diameter of a steel wire, which is used to raise a load of 4000N if the stress in the rod is not to exceed 95 MN/m^2?
7.3mm
1186 - What will be the modulus of rigidity if the value of modulus of elasticity is 200 and Poissons ratio is 0.25?
1186 - What will be the modulus of rigidity if the value of modulus of elasticity is 200 and Poissons ratio is 0.25?
80
1187 - What will be the moment of inertia of a circle in cm^4 of diameter is 10cm?
1187 - What will be the moment of inertia of a circle in cm^4 of diameter is 10cm?
490
1188 - What will be the ratio of Youngs modulus to the modulus of rigidity of a material having Poissons ratio 0.25?
1188 - What will be the ratio of Youngs modulus to the modulus of rigidity of a material having Poissons ratio 0.25?
2.5
1189 - What will be the stress induced in the rod if the height through which load is dropped is zero?
1189 - What will be the stress induced in the rod if the height through which load is dropped is zero?
2P/A
1190 - What will be the the radius of gyration of a circular plate of diameter 10cm?
1190 - What will be the the radius of gyration of a circular plate of diameter 10cm?
2.5cm
1191 - What will be the unit of compressive stress?
1191 - What will be the unit of compressive stress?
N/mm^2
1192 - What will be the value of the Poisson’s ratio if the Youngs modulus E is equal to the bulk modulus K?
1192 - What will be the value of the Poisson’s ratio if the Youngs modulus E is equal to the bulk modulus K?
43468
1193 - When a beam is subjected to simple bending, ____________ is the same in both tension and compression for the material.
1193 - When a beam is subjected to simple bending, ____________ is the same in both tension and compression for the material.
Modulus of elasticity
1194 - When a rectangular beam is loaded longitudinally, shear develops on
1194 - When a rectangular beam is loaded longitudinally, shear develops on
every-horizontal plane.
1195 - When a rectangular beam is loaded transversely, the maximum compressive stress develops on
1195 - When a rectangular beam is loaded transversely, the maximum compressive stress develops on
top fibre
1196 - When a rectangular beam is loaded transversely, the maximum compressive stress develops on ____________
1196 - When a rectangular beam is loaded transversely, the maximum compressive stress develops on ____________
Top fibre
1197 - When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called
1197 - When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called
tensile stress
1198 - When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called ____________
1198 - When equal and opposite forces applied to a body, tend to elongate it, the stress so produced, is called ____________
Tensile stress
1199 - When loads are applied proportionately to a frame structure containing its members in one plane, the structure is called
1199 - When loads are applied proportionately to a frame structure containing its members in one plane, the structure is called
space frame
1200 - When SF is zero, the bending moment is _____
1200 - When SF is zero, the bending moment is _____
Zero
1201 - When space is less, the ___________ staircases is much preferred.
1201 - When space is less, the ___________ staircases is much preferred.
Dog legged
1202 - When the reservoir is empty tension occurs at ___________
1202 - When the reservoir is empty tension occurs at ___________
Toe
1203 - When trying to turn a key into a lock, following is applied___________________?
1203 - When trying to turn a key into a lock, following is applied___________________?
couple
1204 - When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as
1204 - When two plates butt together and are riveted with two cover plates with two rows of rivets, the joint is known as
double riveted double cover butt joint.
1205 - Where in the stress-strain curve, the hooke’s law is valid?
1205 - Where in the stress-strain curve, the hooke’s law is valid?
Elastic range
1206 - Where the center of gravity of a circle lies?
1206 - Where the center of gravity of a circle lies?
At its centre
1207 - Where will be the center of gravity of an I section will be if the dimension of upper web is 2x10cm, lower web is 2×20 and that of flange is 2x15cm If the y-axis will pass through the center of the section?
1207 - Where will be the center of gravity of an I section will be if the dimension of upper web is 2x10cm, lower web is 2×20 and that of flange is 2x15cm If the y-axis will pass through the center of the section?
9.51cm
1208 - Where will be the center of gravity of an I section will be if the dimension of upper web is 2x8cm, lower web is 2×16 and that of flange is 2x12cm If the y-axis will pass through the center of the section?
1208 - Where will be the center of gravity of an I section will be if the dimension of upper web is 2x8cm, lower web is 2×16 and that of flange is 2x12cm If the y-axis will pass through the center of the section?
6.44cm
1209 - Where will be the center of gravity of an I section will be if the dimension of web is 2x20cm and that of flange is 2x15cm If the y-axis will pass through the center of the section?
1209 - Where will be the center of gravity of an I section will be if the dimension of web is 2x20cm and that of flange is 2x15cm If the y-axis will pass through the center of the section?
9.5cm
1210 - Where will be the center of gravity of an T section will be if the dimension of web is 2x20cm and that of flange is 2x15cm If the y-axis will pass through the center of the section?
1210 - Where will be the center of gravity of an T section will be if the dimension of web is 2x20cm and that of flange is 2x15cm If the y-axis will pass through the center of the section?
11.45cm
1211 - Where will be the center of gravity of the following section?
1211 - Where will be the center of gravity of the following section?
8.33cm
1212 - Where will be the centre of gravity of a uniform rod lies?
1212 - Where will be the centre of gravity of a uniform rod lies?
At its middle point
1213 - Where will be the centre of gravity of the following L-section?
1213 - Where will be the centre of gravity of the following L-section?
(18.31,30.81)
1214 - Which is the correct statement about law of polygon of forces ?
1214 - Which is the correct statement about law of polygon of forces ?
if any number of forces acting at a point can be represented in direction and magnitude by the sides of a polygon taken in order, then the forces are in equilibrium
1215 - Which law is also called as the elasticity law?
1215 - Which law is also called as the elasticity law?
Hooke’s law
1216 - Which law states the when a number of loads are acting on a body, the resulting strain, according to principle of superposition, will be the algebraic sum of strains caused by individual loads?
1216 - Which law states the when a number of loads are acting on a body, the resulting strain, according to principle of superposition, will be the algebraic sum of strains caused by individual loads?
Principle of superposition
1217 - Which of the following are the relative properties of the material?
1217 - Which of the following are the relative properties of the material?
Hardness
1218 - Which of the following are the relative properties of the material?
1218 - Which of the following are the relative properties of the material?
Hardness
1219 - Which of the following boards are used in making partitions covering?
1219 - Which of the following boards are used in making partitions covering?
Lamin boards
1220 - Which of the following bond is also known as a local bond?
1220 - Which of the following bond is also known as a local bond?
Flexural bond
1221 - Which of the following cement is used for marine structures?
1221 - Which of the following cement is used for marine structures?
High Alumina cement
1222 - Which of the following conduits possess low resistance to acid nature?
1222 - Which of the following conduits possess low resistance to acid nature?
Steel pipes
1223 - Which of the following device is not based on Bernoulli’s equation?
1223 - Which of the following device is not based on Bernoulli’s equation?
Hydraulic lift
1224 - Which of the following devices measures the velocity of flow?
1224 - Which of the following devices measures the velocity of flow?
Pitot tube
1225 - Which of the following do not have identical dimensions ?
1225 - Which of the following do not have identical dimensions ?
Moment of a force and angular momentum
1226 - Which of the following do not have units?
1226 - Which of the following do not have units?
Specific gravity
1227 - Which of the following estimates is also known as a preliminary estimate?
1227 - Which of the following estimates is also known as a preliminary estimate?
Approximate estimate
1228 - Which of the following filters are also known as chimney drains?
1228 - Which of the following filters are also known as chimney drains?
Inclined filter
1229 - Which of the following forces do not act on the dam?
1229 - Which of the following forces do not act on the dam?
Creep pressure
1230 - Which of the following gauge is the Indian Standard Gauge?
1230 - Which of the following gauge is the Indian Standard Gauge?
Broad gauge
1231 - Which of the following gradient is usually used in the construction of roads?
1231 - Which of the following gradient is usually used in the construction of roads?
Ruling gradient
1232 - Which of the following is a mechanical property of materials?
1232 - Which of the following is a mechanical property of materials?
Elasticity
1233 - Which of the following is a method of aeration?
1233 - Which of the following is a method of aeration?
Cascades
1234 - Which of the following is also known as a ring system?
1234 - Which of the following is also known as a ring system?
Circle
1235 - Which of the following is also known as axial stress?
1235 - Which of the following is also known as axial stress?
Longitudinal stress
1236 - Which of the following is also known as endurance limit?
1236 - Which of the following is also known as endurance limit?
Fatigue limit
1237 - Which of the following is also known as geographical meridian?
1237 - Which of the following is also known as geographical meridian?
True meridian
1238 - Which of the following is also known as pressed woods?
1238 - Which of the following is also known as pressed woods?
Fiber wood
1239 - Which of the following is also known as pulling force?
1239 - Which of the following is also known as pulling force?
Tensile stress
1240 - Which of the following is also known as pushing force?
1240 - Which of the following is also known as pushing force?
Compressive stress
1241 - Which of the following is also known as the working load?
1241 - Which of the following is also known as the working load?
Safe load
1242 - Which of the following is also known as transverse strain?
1242 - Which of the following is also known as transverse strain?
Shear strain
1243 - Which of the following is an exact estimate?
1243 - Which of the following is an exact estimate?
Detailed
1244 - Which of the following is an example for plasticizer?
1244 - Which of the following is an example for plasticizer?
Ca
1245 - Which of the following is correct?
1245 - Which of the following is correct?
Phytoplankton-zooplanktons- fish
1246 - Which of the following is empirical formula coined by Francis?
1246 - Which of the following is empirical formula coined by Francis?
1.84 LH^3/2
1247 - Which of the following is indeterminate structure?
1247 - Which of the following is indeterminate structure?
Propped cantilever beam
1248 - Which of the following is known as block board?
1248 - Which of the following is known as block board?
Batten board
1249 - Which of the following is not a cause of corrosion?
1249 - Which of the following is not a cause of corrosion?
Proper pipe material
1250 - Which of the following is not a cross drainage work?
1250 - Which of the following is not a cross drainage work?
Head regulator
1251 - Which of the following is not a failure of a rectangular dam?
1251 - Which of the following is not a failure of a rectangular dam?
Toe erosion
1252 - Which of the following is not a failure of retaining wall?
1252 - Which of the following is not a failure of retaining wall?
Crushing
1253 - Which of the following is not a hydraulic coefficient?
1253 - Which of the following is not a hydraulic coefficient?
Coefficient of viscosity
1254 - Which of the following is not a leakage detection method?
1254 - Which of the following is not a leakage detection method?
Pipe corrosion
1255 - Which of the following is not a method of chlorination?
1255 - Which of the following is not a method of chlorination?
Use of chloramines
1256 - Which of the following is not a scalar quantity__________________?
1256 - Which of the following is not a scalar quantity__________________?
acceleration
1257 - Which of the following is not a short term estimate in population forecast?
1257 - Which of the following is not a short term estimate in population forecast?
Graphical comparison
1258 - Which of the following is not a soil moisture conservation method?
1258 - Which of the following is not a soil moisture conservation method?
Recharge to ground water
1259 - Which of the following is not a vector quantity_______________?
1259 - Which of the following is not a vector quantity_______________?
weight
1260 - Which of the following is not an example of Malleability?
1260 - Which of the following is not an example of Malleability?
Torsteel
1261 - Which of the following is not base unit?
1261 - Which of the following is not base unit?
Area
1262 - Which of the following is not base unit?
1262 - Which of the following is not base unit?
Area
1263 - Which of the following is not the unit of distance ?
1263 - Which of the following is not the unit of distance ?
milestone
1264 - Which of the following is not the unit of distance?
1264 - Which of the following is not the unit of distance?
Milestone
1265 - Which of the following is not the unit of energy________________?
1265 - Which of the following is not the unit of energy________________?
wattr
1266 - Which of the following is not the unit of power ?
1266 - Which of the following is not the unit of power ?
kcal/kg sec
1267 - Which of the following is not the unit of pressure ?
1267 - Which of the following is not the unit of pressure ?
newton
1268 - Which of the following is not the unit of work, energy and heat ?
1268 - Which of the following is not the unit of work, energy and heat ?
hp
1269 - Which of the following is one of the layouts of distribution systems?
1269 - Which of the following is one of the layouts of distribution systems?
Grid Iron system
1270 - Which of the following is practical pressure?
1270 - Which of the following is practical pressure?
Active earth pressure
1271 - Which of the following is the coefficient of pitot tube?
1271 - Which of the following is the coefficient of pitot tube?
0.98
1272 - Which of the following is the example of lever of first order________________?
1272 - Which of the following is the example of lever of first order________________?
all of the above
1273 - Which of the following is the locus of a point that moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one________________?
1273 - Which of the following is the locus of a point that moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one________________?
hyperbola
1274 - Which of the following is the method of removing the temporary hardness of water?
1274 - Which of the following is the method of removing the temporary hardness of water?
Boiling
1275 - Which of the following is the weakest part in the railway track?
1275 - Which of the following is the weakest part in the railway track?
Rail joint
1276 - Which of the following is theoretical pressure?
1276 - Which of the following is theoretical pressure?
Passive earth pressure
1277 - Which of the following is true if the value of Poisson’s ratio is zero?
1277 - Which of the following is true if the value of Poisson’s ratio is zero?
The material is rigid
1278 - Which of the following is used as retarding admixture?
1278 - Which of the following is used as retarding admixture?
Starch
1279 - Which of the following joint is a simplex joint?
1279 - Which of the following joint is a simplex joint?
AC pipe joint
1280 - Which of the following layout is used for "Direct- Indirect system".
1280 - Which of the following layout is used for "Direct- Indirect system".
Radial system
1281 - Which of the following method is also known as overhead irrigation method?
1281 - Which of the following method is also known as overhead irrigation method?
Sprinkler
1282 - Which of the following method is not used for determining slope and deflection at a point?
1282 - Which of the following method is not used for determining slope and deflection at a point?
Isoheytal method
1283 - Which of the following method is used to determine the slope and deflection at a point?
1283 - Which of the following method is used to determine the slope and deflection at a point?
Macaulay’s method
1284 - Which of the following methods is also known as individual wall method?
1284 - Which of the following methods is also known as individual wall method?
Long wall and short wall method
1285 - Which of the following methods of disinfection is usually adopted in swimming pools?
1285 - Which of the following methods of disinfection is usually adopted in swimming pools?
Ultraviolet rays method
1286 - Which of the following process will you prefer to prevent the leakage of water in the dam foundation?
1286 - Which of the following process will you prefer to prevent the leakage of water in the dam foundation?
Grouting
1287 - Which of the following processes is known as zeolite?
1287 - Which of the following processes is known as zeolite?
Base exchange process
1288 - Which of the following reservoirs is also known as ___________
1288 - Which of the following reservoirs is also known as ___________
Ground service reservoirs
1289 - Which of the following roads (pavements) does not develop any corrugations?
1289 - Which of the following roads (pavements) does not develop any corrugations?
Concrete
1290 - Which of the following roof are used on small sheds and veranda opening?
1290 - Which of the following roof are used on small sheds and veranda opening?
Pent roof
1291 - Which of the following rules is known as "Prismoidal Rule"?
1291 - Which of the following rules is known as "Prismoidal Rule"?
Simpson’s rule
1292 - Which of the following samples is also known as catch sample?
1292 - Which of the following samples is also known as catch sample?
Grab
1293 - Which of the following stress can also be known as hoop stress?
1293 - Which of the following stress can also be known as hoop stress?
Circumferential stress
1294 - Which of the following stresses are associated with the tightening of a nut on a bolt? P. Crushing and shear stress in threads Q. Bending stress due to the bending of bolt R. Torsional shear stress due to frictional resistance between the nut and the bolt
1294 - Which of the following stresses are associated with the tightening of a nut on a bolt? P. Crushing and shear stress in threads Q. Bending stress due to the bending of bolt R. Torsional shear stress due to frictional resistance between the nut and the bolt
P and Q
1295 - Which of the following system is also known as an interlaced system?
1295 - Which of the following system is also known as an interlaced system?
Grid iron system
1296 - Which of the following them is also known as multi span beam _______
1296 - Which of the following them is also known as multi span beam _______
Continuous beam
1297 - Which of the following well is also known as flowing well?
1297 - Which of the following well is also known as flowing well?
Artesian well
1298 - Which of the following wells are also known as water table well?
1298 - Which of the following wells are also known as water table well?
Shallow wells
1299 - Which of the relationship between E, G and K is true, where E, G and K have their usual meanings?
1299 - Which of the relationship between E, G and K is true, where E, G and K have their usual meanings?
E = 9KC / (3K + C)
1300 - Which of these are types of normal stresses?
1300 - Which of these are types of normal stresses?
Tensile and compressive stresses
1301 - Which of these is a non-hoookean material?
1301 - Which of these is a non-hoookean material?
Rubber
1302 - Which of these is the correct way of sign convention for shear force?
1302 - Which of these is the correct way of sign convention for shear force?
R U N
1303 - which one of the following are true for the thermal expansion coefficient?
1303 - which one of the following are true for the thermal expansion coefficient?
αaluminium > αbrass> αcopper > αsteel
1304 - Which one of the following has the largest value of thermal coefficient?
1304 - Which one of the following has the largest value of thermal coefficient?
Aluminium
1305 - Which one of the following pairs is NOT correctly matched?
1305 - Which one of the following pairs is NOT correctly matched?
Visco-elastic – small plastic zone
1306 - Which one of the following pairs is NOT correctly matched?
1306 - Which one of the following pairs is NOT correctly matched?
Temperature strain with permitted expansion – ( αTl – δ)
1307 - Which one of the following statements is not correct_________________?
1307 - Which one of the following statements is not correct_________________?
the sine of the angle of repose is equal to coefficient to friction
1308 - Which point on the stress strain curve occurs after the lower yield point?
1308 - Which point on the stress strain curve occurs after the lower yield point?
Yield plateau
1309 - Which point on the stress strain curve occurs after the proportionality limit?
1309 - Which point on the stress strain curve occurs after the proportionality limit?
Elastic limit
1310 - Which point on the stress strain curve occurs after the ultimate point?
1310 - Which point on the stress strain curve occurs after the ultimate point?
Breaking point
1311 - Which point on the stress strain curve occurs after yield plateau?
1311 - Which point on the stress strain curve occurs after yield plateau?
Ultimate point
1312 - Which stress comes when there is an eccentric load applied?
1312 - Which stress comes when there is an eccentric load applied?
Bending stress
1313 - Which test is conducted to measure the ability of a material to resist scratching, abrasion, deformation and indentation?
1313 - Which test is conducted to measure the ability of a material to resist scratching, abrasion, deformation and indentation?
Hardness test
1314 - Which test is conducted to measure the endurance limit of the material?
1314 - Which test is conducted to measure the endurance limit of the material?
Fatigue test
1315 - Which type of stress does in a reinforcement bar is taken by the concrete?
1315 - Which type of stress does in a reinforcement bar is taken by the concrete?
Compressive stress
1316 - While testing a cast iron beam (2.5 cm x 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is :
1316 - While testing a cast iron beam (2.5 cm x 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is :
960 kg/cm2
1317 - Wholesome water is also known as _________
1317 - Wholesome water is also known as _________
Palatable water
1318 - Why is the strain the fundamental property but not the stress?
1318 - Why is the strain the fundamental property but not the stress?
Because it’s value is calculated in the laboratory
1319 - Youngs modulus of elasticity and Poissons ratio of a material are 1.25 x 102 MPa and 0.34 respectively. The modulus of rigidity of the material is __________
1319 - Youngs modulus of elasticity and Poissons ratio of a material are 1.25 x 102 MPa and 0.34 respectively. The modulus of rigidity of the material is __________
0.4664 MPa
1320 - Zoned earthen dams are also known as ______
1320 - Zoned earthen dams are also known as ______
Heterogeneous dams
No comments:
Post a Comment
Your Valued Comments Help us to improve our site. Thanks